Product concept / UV-C hygiene layer
A handheld UV-C device for everyday surfaces.
LumoGlide is moved directly over materials and flat surfaces. It adds a fast, dry and repeatable hygiene procedure between regular cleaning and chemical disinfection.
User problem
Everyday surfaces are often touched, but not easy to wash or disinfect quickly.
Clothes, pillows, sofas, kitchen countertops, massage beds or car seats require a simple procedure that can be repeated often without moisture, chemicals or a complicated setup.
Soft materials
Hard to clean quickly between full washing cycles.
Chemical fatigue
Sprays can leave odor, residue or irritation.
Home peace of mind
Extra hygiene layer when family members are sick.
Business trust
Visible procedure that communicates hygiene to customers.
Operating principle
Move over the surface. UV-C acts underneath.
UV-C light is directed downward and intended to be active only while the device is moving. The goal is to reduce microorganisms by damaging their DNA/RNA so they are no longer able to reproduce.
Direct surface movement
The user moves LumoGlide directly over the surface or material.
Motion-controlled UV-C
UV-C works only during movement, supporting dose control and safety logic.
Microorganism reduction
Light exposure reduces bacteria, viruses and fungi depending on organism and test conditions.
Product-focused design: simple outside, controlled inside.
The one-pager should make the product understandable before it goes into technical detail.
3 × UV-C LED windows
Downward-facing emission, designed to illuminate the surface under the device.
Motion sensor
Measures movement so exposure can be related to speed and time over the surface.
LED strip indicator
A violet status ring gives the device a recognizable premium visual signature.
USB-C charging
Consumer-friendly charging for an integrated battery-powered handheld product.
Ergonomic mouse-like shape
Familiar hand movement makes the cleaning action simple and repeatable.
Use case & estimated dose
5 mJ/cm² UV-C
At a movement speed of 20 cm/s, the current concept estimates a UV-C dose suitable for first validation messaging.
Expected reduction of microorganisms strongly depends on the specific microorganism, surface type, dose uniformity and test conditions.
Home and professional applications.
Frequently touched surfaces that require a fast, simple and repeatable hygiene procedure.
Pillow 50 × 40 cm
About 50 seconds.
Couch 120 × 60 cm
About 2 minutes.
Kitchen countertop
About 4 min 30 s.
Car seat 50 × 50 cm
About 40 seconds.
Positioned between everyday cleaning and full chemical disinfection.
The page should avoid overclaiming: LumoGlide does not remove visible dirt and does not guarantee full sterilization.
LumoGlide
- Dry process, no wet residue
- Seconds to minutes, depending on surface
- UV-C directed downward
- Simple repeatable motion
- Not a replacement for removing dirt, stains or grease
Chemicals
- Effective when used correctly
- Requires wet contact time
- Can leave odor, residue or stains
- May irritate skin or eyes
- Can affect some materials
UV lamps
- Effective under correct exposure
- Often requires longer process time
- People must leave the room
- Uneven exposure risk
- Larger device footprint
Prototype development and validation.
Keep the status factual and technical. Show what has been verified, and what still needs lab validation.
PCB build tested
Prototype electronics built and tested electrically and thermally.
Mechanical prototype
Product shape, internal layout and basic mechanical concept prepared.
UV-C measured
Radiation measurement performed as a basis for dose estimation and next validation tests.
Interested in LumoGlide?
Get in touch: contact@lumoglide.com